10/100 AT
The 10/100 Ethernet Tap is a single port device that provides a method to observe traffic on a full duplex Ethernet segment. The 10/100 Ethernet Tap provides easy access to segments while maintaining network integrity with "no break the link" design. Network performance will not be affected by power loss.
- Eliminates the need for network connectors to be disconnected and connected each time a segment needs to be analysed
- Non-intrusive, fault-tolerant, invisible to the network
- Redundant power supply insures seamless monitoring even if the main power source is unavailable
- Never lose packets from power failure - industry-leading "no break the link" design guarantees network traffic will continue to flow uninterrupted
- View all traffic on both sides of full duplex links
- Reduces degradation of switch performance due to port mirroringView Layer 1 and 2 errors such as runts and CRC errors
- Comes with convenient built-in rack-mount or use an optional rack-mount package to mount 3 units (at 1U) and up to 14 units (at 4U).Passes all pairs
- Supports Power over Ethernet (PoE)
| Specifications |
|
| Network Connections |
|
|
10/100 Tap (RJ45) |
| Monitoring Connections |
|
|
10/100 (RJ45) |
| Power |
|
|
5 VDC. 0.5A |
|
Redundant Power Supply |
| Dimensions (H x W x D) |
|
|
1.07 x 5 x 5 in |
|
2.7 x 12.7 x 12.7cm |
| Weight |
|
|
8 OZ. |
|
0.23 KG |
| Operating Temperature |
|
|
0oC to 40oC |
| Storage Temperature |
|
|
-30oC to 65oC |
| Humidity |
|
|
Less than 95oC non-condensing |
| Certification |
|
|
EN 50082-1 61000-4 Series
|
|
EN 55022 Class A
|
|
Low Voltage Directive 72-23-EEC (1993)
|
|
CFR 47 Part 15 Class A
|
|
CE
|
|
Fully RoHS Compliant |
| Warranty |
|
|
Two Years |
| Ordering Information |
|
|
10/100-AT 10/100 Ethernet Tap |
| Optional Rack Mount |
|
| |
RMC-3 |